8. The kit’s complement of plumbing and mounting hardware covers the entire installation, from filters, hose clamps, hose, and Twist-Lok fittings, to the ⅓ gallon sump, harness, and mounting brackets. As with any EFI fuel system, you will need to feed the pump a healthy supply of 12V power. Never operate a fuel pump directly off the ECU; doing so can burn up the ECU. Use the ECU’s fuel pump trigger wire to energize a relay that feeds power to the pump directly from the battery. If using Edelbrock’s E-Street EFI, the sump plugs directly into the E-Street’s fuel pump relay harness.