|
Once the hoses are routed and connected with a tubing wrench (the low-pressure return hose connects with a hose clamp, so use a nut driver on that one), you can torque the banjo fitting on the pressure-side hard line to 32 ft-lb. Our original V-belt measured 36 inches long, but was too long for the more compact DSE system. We used a 34.5-inch belt, but a 33.5- or 33-inch belt would've been ideal. The shorter belt run and deep-groove CV pulley significantly reduce the possibility of throwing a belt at high rpm. View Related Article
|
|