| SUMMIT PAINT |
| SYSTEM PRICING |
| Wax and grease remover (quart) | $9.95 |
| Surface wash (quart) | $9.95 |
| Fish-eye eliminator (pint) | $9.95 |
| Epoxy primer (gallon) | $49.95 |
| Epoxy catalyst (quart) | $16.95 |
| 2K primer surfacer (gallon) | $39.95 |
| Single-stage urethane topcoat (gallon) | $79.95 |
| Urethane specialty metallic topcoat (gallon)* | $89.95 |
| Universal urethane activator (quart) | $19.95 |
| Universal urethane reducer (quart) | $9.95 |
| Medium-solids urethane clearcoat (gallon) | $49.95 |
| High-solids urethane clearcoat (gallon) | $59.95 |
*Includes Candy Apple Red, Ultra Blue Pearl, Dark Plum Metallic, Viper Red, Mocha Frost Pearl, Mayan Gold Metallic, Bright Orange Metallic.
| TYPICAL |
| PAINTJOB COST |
| Wax and grease remover (quart) | $9.95 |
| Surface wash (quart) | $9.95 |
| Epoxy primer (gallon) | $49.95 |
| Epoxy catalyst (quart) | $16.95 |
| 2K primer/surfacer (gallon) | $39.95 |
| Universal urethane activator (3 quarts) | $59.85 |
| Single-stage urethane top coat (gallon) | $79.95 |
| Universal urethane reducer (quart) | $9.95 |
| Medium-solids urethane clearcoat (gallon) | $49.95 |
| Total | $326 |
The Products
Prep Solvents
Wax and grease remover: Strong blend of solvents to remove bugs, road grime, oil, and other residue from the body during and after body preparation
Surface wash: Mild wash for the last wipe down before primer or paint is applied. This removes any remaining dust and debris.
Fish-eye eliminator: To allow the paint to flow and adhere evenly over imperfections and avoid the fish-eye effect.
Primers
Epoxy primer: Specially formulated for superior adhesion to bare metal. It's mixed 4:1 with the epoxy catalyst.
Urethane 2K primer: High-build primer to conceal low spots in a fast-drying formula. Will stick to sealers, primers, OE finishes, and body filler. This should be mixed 4:1 with the urethane activator.
Paint
Single-stage urethane topcoat paint: Premium formula makes this paint highly resistant to damage from UV exposure, chemicals, weather, and chips. Will hold its color and gloss longer than acrylic and synthetic enamels. Does not require a clearcoat for glossy finish. Available in 20 colors; clear is optional for enhanced gloss.
Universal activators: Mix in a 4:1 ratio with Summit's urethane products. Three different activators are offered to compensate for the painting conditions; fast activator for below 70 F, medium for between 70 F and 80 F, and a slow for 80 F and above.
Urethane reducers: To allow flow and leveling of paint, comes in fast, medium, slow, and special Zero-VOC to comply with strict environmental regulations (read: California). With topcoat, mix up to 10 percent; for high-solids clears, mix 4:1:1.
Clear
Medium-solids urethane clear: User-friendly operation, standard, but not economy, version
High-solids urethane clear: Higher-build, deeper-gloss version of the medium-solid clear