Popular Hot Rodding Magazine Homepage

1976 Camaro Disco Bumper

Prev Next
Alan Johnson: "Here you can see how much we narrowed the front bumper, and how much we cut away front the end that wraps around. It's about an inch and a quarter on the width, and about an inch and three-quarters on the wrap-around. That's for each side. Once I was happy with that, I TIG welded it all together."
1976 Chevrolet Camaro - Project G/28 - Bye-Bye Disco Bumper!

 Alan Johnson: "Here you can see how much we narrowed the front bumper, and how much we cut away front the end that wraps around. It's about an inch and a quarter on the width, and about an inch and three-quarters on the wrap-around. That's for each side. Once I was happy with that, I TIG welded it all together."  View Related Article

 

Car Research Guide