Popular Hot Rodding Magazine Homepage Popular Hot Rodding

1976 Camaro Disco Bumper

Prev Next
Alan Johnson: "The back was pretty easy. All we had to do was countersink the eight holes in the bottom of the rear bumper (shown in the foreground). We took out the factory shims that go between the bumper and the bracket to pull the bumper into the body visually.
1976 Chevrolet Camaro - Project G/28 - Bye-Bye Disco Bumper!

 Alan Johnson: "The back was pretty easy. All we had to do was countersink the eight holes in the bottom of the rear bumper (shown in the foreground). We took out the factory shims that go between the bumper and the bracket to pull the bumper into the body visually.  View Related Article

 

Get Adobe Flash player

Car Research Guide