Popular Hot Rodding Magazine Homepage Popular Hot Rodding

1968 Dodge Dart

Prev Next
Mopar fenders are usually held on by fasteners along the inner fender apron, at the bottom inner rocker behind the wheelwell, at the radiator support, and by a stud below the A-pillar. To get at the A-pillar fastener, it is easiest to start by removing the inner rear splash shield.
1968 Dodge Dart - Front-End Facelift

 Mopar fenders are usually held on by fasteners along the inner fender apron, at the bottom inner rocker behind the wheelwell, at the radiator support, and by a stud below the A-pillar. To get at the A-pillar fastener, it is easiest to start by removing the inner rear splash shield.  View Related Article

 

Get Adobe Flash player

Car Research Guide