Popular Hot Rodding Magazine Homepage Popular Hot Rodding

S2 Installation Into A First Gen Camaro

Prev Next
The typical location for the water temp sensor is at the rear of the passenger-side head. On the far left is the 12mm (1.5 thread pitch) plug that's mounted in the head from the factory.
LS2 Installation Into A First Gen Camaro - LS2 Trans Plant Part I

 The typical location for the water temp sensor is at the rear of the passenger-side head. On the far left is the 12mm (1.5 thread pitch) plug that's mounted in the head from the factory.  View Related Article

 

Get Adobe Flash player

Car Research Guide