Popular Hot Rodding Magazine Homepage Popular Hot Rodding

1968 Chevrolet Camaro Subframe

Prev Next
Taking a page from the stock car racing manual, 21st Century added a way to adjust camber and instant center with the upper control arms. Laser cut slugs fit into the mounting holes and adjust the inner pivot location on the control arm. Changing this height is as easy as swapping in various slugs. The included slugs range from centered to half-inch offset. Since the slugs can be used in either direction, it gives one full inch of adjustability in 1/16-inch increments.
1968 Chevrolet Camaro - Subframe - Framed!

 Taking a page from the stock car racing manual, 21st Century added a way to adjust camber and instant center with the upper control arms. Laser cut slugs fit into the mounting holes and adjust the inner pivot location on the control arm. Changing this height is as easy as swapping in various slugs. The included slugs range from centered to half-inch offset. Since the slugs can be used in either direction, it gives one full inch of adjustability in 1/16-inch increments.  View Related Article

 

Get Adobe Flash player

Car Research Guide