Popular Hot Rodding Magazine Homepage Popular Hot Rodding

0603phr Air 11 Z

Prev Next
You'll need to cut out some of the front frame for clearance in the coil spring pocket. Air Ride requires a 2.75-inch tall channel around the shock mount that provides at least a 1/2-inch clearance on both sides of the ShockWave air spring. You will then need to cut off the fingers inside the frame once the channel is opened up. Not all applications require cutting, so check with Air Ride Technologies about your specific vehicle.
Air Ride Technologies - Air O' Dynamics

 You'll need to cut out some of the front frame for clearance in the coil spring pocket. Air Ride requires a 2.75-inch tall channel around the shock mount that provides at least a 1/2-inch clearance on both sides of the ShockWave air spring. You will then need to cut off the fingers inside the frame once the channel is opened up. Not all applications require cutting, so check with Air Ride Technologies about your specific vehicle.  View Related Article

 

Get Adobe Flash player

Car Research Guide