Paddle Shifter Install - Twisted Shifter
You will then need to install the wireless transmission interface. It needs to be located somewhere near the steering column. We mounted ours where the firewall meets the trans tunnel using that magic Velcro stuff. Then, I connected the unit to a switched 12v supply and a ground. In this location there is a clear path between the Shifter hub and the interface. Both the Shrifter hub and the wireless interface both have test lights on them so you can make sure the location is good. When you tap the right Shrifter lever toward you the green light will blink on the interface and the red light will blink on the Shrifter hub. When you tap the left Shrifter lever the red light will blink on the interface and the red light will blink on the Shrifter hub again. This way you're assured that the signal is strong enough.
View Related Article
|
|