The intake is an Edelbrock Super Victor (PN 2925), and is designed for heads with a standard port location. The runners match the "flat floor" entry of the latest 23-degree heads. The carb pad height is 5 1/2 inches (measured from the end seals) and overall, the Super Victor is about 1-inch taller than the Victor Jr. (PN 2975). Naturally, Sherman will match the ports to the heads. Sherman says, "Using a good intake design like this is more about port matching than port sizing. Edelbrock made a good intake, and all it needs is some matching work to fine-tune it."