Odyssey Expands Battery Line
EnerSys has expanded its Odyssey Performance Series battery product line to include sizing in Group 34 and Group 78. Both feature 792 cold cranking amps (CCA) and 114 reserve capacity (RC) minutes. They also feature deep cycle capability up to 400 cycles at 80 percent depth of discharge. The new Performance Series battery sizes feature the same rugged EnerSys construction, deep cycling capabilities, long service life, and high reliability. Odyssey Performance Series batteries offer a 3- to 10-year service life and two-year storage life at 77 degrees F (25 degrees C). They are vibration resistant, classified as non-spillable by the U.S. Department of Transportation, and include a four-year full replacement warranty.
Boze Shifter Wheel
Several years ago, Boze started on a Pro Touring 'Cuda project with their friend, Rasmus Porsager, from Denmark. He asked them to build a set of 20-inch Shifter wheels to his specifications, sizes 20x8.5 (front) and 20x12 (rear). He also asked for a two-tone finish with powdercoated charcoal centers and brushed satin rims. These wheels were installed with Michelin PS2 tires in sizes 235/35ZR20 and 335/35ZR20, and we think you'll agree they yield such a nice stance on this '70 Barracuda! All Boze wheels are custom built to your dimensions and finish, so if you're looking to snazz up your Pro Touring ride with something special, give Boze a call.
Cool Your Monster Motor
Cooling a monster motor is a challenge, especially with tight engine compartments and small grille openings. Be Cool's advanced Direct-Fit Modules deliver ultimate cooling power for 400-, 700-, and 1,000-plus horsepower applications by combining maximum core surface area and powerful electric fans with direct-fit convenience for most vehicles.
Be Cool Direct-Fit Modules include Be Cool's dual 1-inch core aluminum radiator, high-torque fans, fan mounting brackets and hardware, vented aluminum recovery tank, billet aluminum pressure cap, wiring harness with temp control sending unit, and 40-amp relays.
All Be Cool radiators feature folded and tapered aluminum tanks, billet filler neck, OE inlets and outlets, internal seven-plate trans cooler (for auto trans applications) and fully welded epoxy-free construction. Every U.S.-built Be Cool radiator is custom-fit for flange, pin, foot, or cradle-mounting, pressure tested, and backed by a limited one-year warranty.
Sheetmetal From Eastwood
The Eastwood Company has launched a line of replacement sheetmetal for classic cars and trucks from Auto Metal Direct (AMD). Offering panels for GM and Mopar vehicles dating back to 1957, the replacement sheetmetal panels replicate original stampings and details. With over 900 panels available, restoration shops and hobbyists now have a solution for replacing original panels that are too damaged to fix. Featuring the same thickness metal as OEM, correct nuts, and stamping details, the AMD panels fit and look just like the original panels.
"There are a variety of brands of replacement panels for classic cars available, but many are poor stampings that do not fit properly and are made of thinner gauge metal," said Nick Capinski, Eastwood restoration expert. "The AMD panels fit and look just like the original panels, down to the minor details."
Eastwood offers replacement hoods, quarter-panels, fenders, doorskins, floorpans, and all of the tools and supplies needed to install and prep these panels for paint.
New Belts For GM Classics
Juliano's Interior Products now offers officially licensed GM seatbelts in addition to their already extensive lineup of safety restraints. With three buckle designs including brushed stainless or a plastic-covered push-button release with GM logos, or the color-matched Chevy Bow Tie lift latch, there is sure to be a perfect match for your GM classic.
The lap belts are available in 60- or 74-inch length in over 40 colors. Of course all of Juliano's seatbelts are made in the United States and meet or exceed FMVSS 209 and 302 safety standards. Installation is straightforward using your existing mounts, or choose Juliano's anchor plate kits. Prices start at $39.95.