There's a lot to be said for the KISS principle. You know: Keep it Simple, Stupid. Bryon Pryde, a professional hot rod fabricator for over 20 years, has the tools and the skills to put together pretty much whatever he wants. (Plug: Pryde Metalcraft, 602-799-7966.) If he chose to, he could take a car buildup right over the top and into the next county. He's got the technology.

But check out this neat little Chevelle he's built: It's subtle, conservative, clean—elegant in its simplicity. Classic, in a word. From middle distance, the car could almost pass for your typical Day Two restomod—until you start really looking at it, and you see how slick and well screwed together it is. Nope, instead of putting himself in the trick bag with flash and gadgets, Bryon has chosen to focus his efforts on simply enjoying his Chevelle. And he's been enjoying it for a quarter of a century now.

Number one in Bryon's book, obviously, is functionality. We'll start under the hood with the straightforward 461ci big-block. Essentially, it's a .030-over LS6 crate deal with Edelbrock oval-port heads boasting untouched 290cc intake ports. With the compression ratio pegged at 10.0:1, the combination is dialed in to run on regular pump gas. The cam is a .587/.570-inch Crane hydraulic roller, the intake manifold is an Edelbrock Performer, and the fuel delivery is handled by—look at this—a rather shaggy-looking Rochester Quadrajet. Oh, how quaint.

Here in the age of OCD digital management systems, the package doesn't look like much. But it works. On the dyno, the engine makes an easy 500 hp at 5,500 rpm, but here's the good part: It pounds out over 500 lb-ft of torque across the entire range, from 3,000 rpm to redline. It's a torque monster, a torqueasaurus. With a stock Turbo 400 three-speed automatic working a 12-inch torque converter and 3.08:1 gears, the 3,900-pound Chevelle motors through the quarter-mile like a boss—in the mid 12s at 107 mph. On its daily street tires.

It's all part of Bryon's plan. "I built this car as time and money allowed while driving it every day," he says. "I built it to be a fun driver that is faster, and brakes and handles better than stock, but still keeps the look of a classic American muscle car." Accordingly, he's focused his modifications on the prudent and effective, for example in the Hotchkis suspension upgrades: tall B-body spindles and tubular upper control arms up front, with the company's lower control arms and adjustable upper links at the rear. The sway bars are also Hotchkis pieces, 1.375-inch front and 1.00-inch rear, with the whole deal tied together with Hotchkis chassis braces. Front and rear springs are from H.O. Enterprises; shocks are Bilsteins.

Just as with the engine, the chassis combination may not be trick-o'-the-day, but it works just fine. It works well enough for Bryon to perform most respectably in the autocross events an SCCA buddy roped him into, and also at Goodguys venues and on permanent road courses. Nevertheless, Bryon says the biggest change in the car's character was in the brake package, a four-wheel disc setup from Baer. In his eyes, the new brakes transformed the Chevelle from a museum piece into a modern, everyday driver.

And that's important. As we can see, there's been some serious bonding between Bryon and his '69 since they first met, and he's about nurturing the relationship. "I bought this car back in March 1988, and I'm the third owner," he says. "The original little old lady owner was in her mid-to-late 50s when she bought the car. She saw it in the showroom and had to have it because it had red bucket seats. When I got it, the car was in very good original shape with 102,000 miles. The interior was original, also the paint on the hood, roof, and decklid." And while the Chevelle has now been massaged from one end to the other over the past 25 years, it still retains much of its original genetic material. The transmission, driveshaft, and GM 12-bolt rear axle are the date-coded components the Chevelle was born with.

"This is a true hot rod," Bryon says. "It's been driven 100,000 miles since I've owned it. I've raced it at four different dragstrips and two different road courses." The Chevelle has also done a ton of Goodguys and Super Chevy shows and some Hot Rod Power Tours, we note. As Bryon says, "It's been wrecked, blown up, and caught on fire. I just hope I don't put it on its roof!" We hope so too, Bryon. Have a blast with your sweet Chevelle, and check back in with us in another 25 years.