By The Numbers
1963 Dodge 330
Ted Moser, 55
West Hills, CA
Total cost to build: $30,000

ENGINE
Type: Chrysler 440 big-block
Block: factory RB block bored to 4.350 inches
Oiling: stock
Rotating assembly: factory crank and rods;
JE 10.25:1 pistons
Cylinder heads: stock iron castings
Camshaft: Mopar Performance 228/241-at-.050
hydraulic flat tappet;
.450-/.458-inch lift;
115-degree LSA
Valvetrain: stock
Induction: Edelbrock intake manifold,
dual Carter carbs
Ignition: MSD distributor and plug wires
Exhaust: TTI long-tube headers,
custom H-pipe,
dual 2.5-inch MagnaFlow mufflers
Cooling: stock water pump and radiator
Output: 380 hp and 440 lb-ft at rear wheels
Built by: owner
DRIVETRAIN
Transmission: Chrysler A-833 four-speed trans,
stock clutch, Hurst shifter
Rear axle: Chrysler 8¾-inch rearend
with 3.54:1 gears
CHASSIS
Front suspension: stock '70 B-Body K-member,
suspension, and steering box
Rear suspension: factory Hemi leaf springs,
custom subframe connectors
Brakes: stock B-Body discs, front;
stock drums, rear
WHEELS & TIRES
Wheels: American Racing Torq-Thrust 15x4, front;
custom 15x10 steelies, rear
Tires: Firestone Deluxe Champion 775x15, front;
BFGoodrich 275/60R15, rear