Popular Hot Rodding Magazine Homepage Popular Hot Rodding
Get Adobe Flash player
20 Affordable Project Cars Laguna

20 Affordable Project Cars

The High Price Of Classic Muscle Cars Got You Down? Consider These Alternatives For Your Next Project!
By Liz Miles
Photography by Robert McGaffin
20 Affordable Project Cars Laguna
So you've decided to start shopping for a project car, and for one reason or another, you've got a limited budget. There are always going to be economic lulls and discouraging situations, but when it forces you to lose out on your hobby and your passion, then hope can be hard to keep. It's still possible, even on a limited budget, to find a cool running and driving project car; chances are it won't be a '69 Camaro, a Mustang fastback, or a Hemi 'Cuda, but who said you always need one of those to be cool?

20 Affordable Project Cars Mustang
Captured by Steve Baur of... 
   
  read full caption
20 Affordable Project Cars Mustang
Captured by Steve Baur of Muscle Mustangs and Fast Fords magazine, this '92 notchback Mustang has a Vortech supercharger, Edelbrock heads and camshaft, and makes 440 hp at the rear wheels. Owner Brian Baur takes it to the dragstrip and is shooting for 11s.
1979-1993 "Fox" Mustang
This one may seem too obvious to be on this list, but it's such a prime example of what you can do on a low budget. Look no further than contributor Stephen Kim, and his Project Fox. These Mustangs were wildly popular since the day they came out and have quite a following. For the 1990 model year, Ford was redesigning the Mustang based on Mazda's front-wheel-drive MX-6. Letters from Mustang fans ultimately ended this idea, keeping the Mustang's traditional rear-wheel-drive with a V-8 option alive. (One exception was the SVO Mustang. Rather than a V-8, it came with a turbocharged four-cylinder, making nearly as much power as the V-8 in a lighter package. These turbo cars could easily be modified to make well more than that.) The 1987 production year brought styling and engine changes; improved fuel delivery and air metering meant more power. These third-generation Mustangs are being transformed into road racers, drag racers, and street cruisers. They are light, easy to work on, and have more aftermarket support than all of the cars on this list by far.

20 Affordable Project Cars Mustang 5.0
This drawing by Eric Brockmeyer... 
   
  read full caption
20 Affordable Project Cars Mustang 5.0
This drawing by Eric Brockmeyer is very typical to what one might do with a 5.0 Mustang. This notchback is lowered, has some big wheels, and an updated front fascia. About the only thing left original was the factory Wild Strawberry color.
By The Numbers
Typical Price Range: $1,500 - $5,500
Total model production: 2,608,705
Platform variants: Ford Fairmont, Mercury Zephyr and Capri
Available engines: I-4 144ci Turbo, V-8 302 ci
Coolness factor: 5
Aftermarket support: 5
Availability: 5
Website resources: www.foxbodyforum.com

20 Affordable Project Cars Mustang Ad
We Found It
The later years of this generation Mustang (often called the aero nose) are more valuable than the earlier ones because of improved body styling and performance. This '90 LX has already gotten quite a bit of attention with aluminum heads, thousands of dollars in new parts, and a new paintjob. The 38-bid race ended at only $2,700. Seems like a low price to pay for such a performer.

20 Affordable Project Cars Impala
This is a press photo released... 
   
  read full caption
20 Affordable Project Cars Impala
This is a press photo released by GM in 1965 showing off the new style of the '65 Impala. This was the model year that broke records in sales, still unmatched today. It's not common to see many in this condition these days as they are usually customized or left out to rust. Luckily there are millions to choose from.
1965-1970 Chevy Impala
Chevrolet's redesign of the Impala in 1965 proved a brilliant plan when the sales figures came in. The '65 model year sold over 1 million Impalas, higher than any car ever. The next year had similar sales results. The Impala is a fullsize luxury model that came in two- and four-door versions. They were second only to the Caprice in options. It wasn't all about looking good though: They also packed some power. They housed the famous 409 big-block as well as the more traditional 396-, and 427-inch big-blocks. All of these years had the SS available except the '70, where the SS name was dropped and a 454 incher took the place of the 427. These powerboats use all of the drivetrain components that are common to Chevy-folk. Though they may not ever be canyon carvers, the aftermarket has brought a lot of great suspension and braking parts to the table.

By The Numbers
Typical Price Range: $1,500 - $10,000
Total model production: 4,496,857
Platform variants: Buick LeSabre; Chevrolet Biscayne, Bel Air, and Caprice;
  Pontiac Bonneville and Grand Prix
Available engines: V-8: 283, 307, 327, 350, 396, 409, 427
Coolness factor: 5
Aftermarket support: 4
Availability: 6
Website resources: www.impalas.net

20 Affordable Project Cars Impala Ad
We Found It
This '66 two-door hardtop sold for $8,800 through eBay's "Buy It Now" program, where one bid wins the auction at the seller's asking price. The car is ready to hit the car shows with minimal work. Fully restored SS427 Impalas sell for higher than this example, while non-running project cars started around $1,500. The sheer volume of these cars makes them inexpensive and easy to find.

20 Affordable Project Cars Pontiac Ventura
This is probably the nicest-looking... 
   
  read full caption
20 Affordable Project Cars Pontiac Ventura
This is probably the nicest-looking Ventura ever. This '71 has got an absolutely breathtaking paintjob and classic drag-race star wheels. The interior was redone with leather upholstery and reclining race-inspired seats.
1971-1977 Pontiac Ventura
Pontiac's entry to the GM X-body line was the Ventura II in 1971. In the '60s, the Ventura was a fullsize car as a fluffed-up version of the Catalina. The '70s name Ventura II was given to distinguish between the two. The first Venturas came in a variety of Chevy six- and eight-cylinder engines. It wasn't until 1972 that the Ventura came with a Pontiac 350 for the base V-8 model. A special GTO package was available in '74 that gave it a shaker hood and special trim. Plans to continue the GTO package through 1975 were dropped when GM decided to use a Buick V-8 instead of the Pontiac. Later they would also replace the Chevy 250 I-6 with the Buick 231 V-6 found in the '80s Regals. The Ventura shared skeletons with the Chevy Nova, Oldsmobile Omega, and Buick Apollo. This would make aftermarket parts readily available to transform the Ventura anyway you could want. Early Camaro suspension parts are also interchangeable. Unfortunately, the 1.5 milion Novas made verses the 350,000 Venturas made draws their values up. Unless you're a Pontiac fan, the Nova is a more economical choice.

By The Numbers
Typical Price Range: $3,000 - $12,000
Total model production: 347,081
Platform variants: Buick Apollo and Skylark; Cadillac Seville; Chevy Nova;
  Oldsmobile Omega
Available engines: V-8: 307/350 Chevy, 350 Pontiac, 350 Buick
Coolness factor: 5
Aftermarket support: 4
Availability: 2
Website resources: www.pontiacventura.com

20 Affordable Project Cars Pontiac Ventura Ad
We Found It
We found quite a spread of prices for the Ventura. The earlier years were selling for well over $10,000, much higher than their sister Novas. The later years, however, are left without bids. This '77 is extremely clean with a 305 backed by an automatic transmission and a spotless interior. The starting price was $3,200 and no bids were placed.


1  | 2  | 3  | 4  | 5  | 6  | 7  | Next

Discuss in our Forums
Ford Shelby GT500 Research
Ford Shelby GT500 Read detailed reviews on the all new Ford Shelby GT500 and compare it with other vehicles you may be thinking of buying. The 2010 Shelby GT500 has fuel economy of 18 mpg and can seat 4 people comfortably. The Ford Fusion and the Cadillac Sts are other vehicles that might interest you.

Related Hot Rod Pictures

Related Articles

 
1976 Chevy Laguna S3 - Laguna Seeka
It was hate at first sight. Like having your marriage arranged with an ugly chick, Steve Yoder... more
 
Big-Block Chevy - The Pile Driver - Part 2
Last month, we built a 509ci solid-roller big-block Chevy, using the leftover block, crank, and oil... more
 
1993 Ford Mustang Notchback - Shift of Power
When it comes to extracting ridiculous power out of a big-block, it's so easy a Wall Street CEO... more
 
DCI 455 Pontiac Engine - Murphy's Law
As a long-time carb tuner and engine builder, Johnston takes great pride in his work, and when... more
 
Dart Short-Block Crate Motor - Halfway There
Just about any engine builder, whether a pro or a backyard hobbyist, looks at the completion of the... more
 
LT1 Block and Cams - LT1 Cam-O-Rama
For those of us old enough to remember '80s Reaganomics and learning about new math in school (what... more
 
1975 Chevy Laguna - Yearn To Turn!
Whether you dig the Pro-Touring movement, and its attendant propensity for big g-force turns or... more
 
1970 Ford Fairlane 500 - The Fast Lane Fairlane - PHR Project Car
It's hard to believe that we started work on this big blue Ford over two years now. When we managed... more
 
1973 Chevy Camaro - Bitten By The Boost
It's not that Rob Morell is impossible to please. He's just always tinkering, trying something new,... more
 
Friday October 9th Engine Masters Challenge Finals Updates and Results Sponsored by Rottler
Click Here for Friday October 9th Engine Masters Challenge Finals Updates and Results Sponsored by... more