One of the last steps was setting the TV cable line pressure on our 700-R4 trans. If this isn't done right, you can drive through your clutches and burn them up quickly due to not enough line pressure. This Lokar kit from Phoenix Transmissions has an adjustment for TV cable length, which according to Greg Ducato of Phoenix should be set "tight as a string" when the throttle is wide open. If it's too long, shifts will come too soon. Note the snazzy billet throttle bracket from Summit. On the subject of the trans, we needed to hook up a switched 12-volt wire to operate the converter lock-up solenoid on the trans.