1967 Chevrolet Corvair - Yellow Yeowsers!

The evolution versus creationism debate is one of those volatile subjects you just shouldn't discuss, but for the sake of debate, we're going to do it anyway. What prompts such dialogue in a car magazine is a vehicular specimen that transforms what is typically an either-or proposition into a harmonious coexistence of both beliefs. A front-engine, Buick-powered Corvair that runs 10s and rides on a G-body chassis doesn't just spontaneously materialize by itself. The ingenuity of its craftsmanship and the diversity of its gene pool most certainly required an omnipotent creator. Nevertheless, had the lineage of rear-engine Chevys not gone sterile, it may have evolved into something that bears an uncanny resemblance to Larry Bell's '67 Corvair. It's a fascinating convergence of diametrically divergent ideologies, but when it comes to cars, two schools of thought are better than one.

To describe Larry's car-building ability as omnipotent is by no means a stretch of the truth. Here's a man who mounted a unibody car on a conventional frame, turned what was a trunk into an engine bay, stuffed that space with a big-block Buick, and fabbed it all himself in his garage for less than $10,000 using a heap of salvage yard parts. So significant are these engineering triumphs that the car's 10.96-at-123-mph e.t.'s seem like only a minor achievement. Not one to gloat, however, he quickly deflects much of the credit to his friend Mike Myers who, through an act of sheer happenstance, realized that the Corvair and G-body have the exact same wheelbase. "Mike had a Monte Carlo that had been sitting in the snow for a long time, and he took the body off to sell it to someone," Larry explains. "He slid the frame back in the garage, laid down a bare Corvair body on top of it to maximize garage space, and realized that the spring pockets on the two cars lined up perfectly. The Corvair was so rotted out that Mike had nothing to lose, so he just started whacking on the car to see if he could mount it onto the G-body frame, and it worked."

Coming from a family of Corvair nuts, his friend's freak discovery laid the foundation for a future project in Larry's head. The big difference was that, unlike Mike, a small-block Chevy wasn't part of the plan. Once the proud owner of a '72 Grand Sport convertible that saw its share of street skirmishes, Larry has been an avid Buick man for several years. "I went to Mike's house once he was further along with his project and decided that I also wanted to build a Corvair as long as I could fit a 455 Buick in it," Larry recollects. Fortunately, he knew just where to go to find a suitable project car. His dad had purchased two Corvairs (one that was wrecked with low miles, and another intended to be a donor) that he planned on turning into one solid car. He never got around to it, so Larry gave him a call to buy both cars from his dad. "He had asked me if I was interested in taking them off his hands in a past conversation, and I said no. When I called him back to take him up on his offer, he said he just called a salvage yard to come haul them off. Had I called him two hours later, this car would not have been built," Larry says. The next step was scoring a frame, and Larry again happened to be at the right place at the right time. He spotted an '85 Monte Carlo SS at a salvage yard that was moments away from getting crushed, and talked the owner into letting him have the frame for free.

While you can chalk up his impeccable timing to luck, the rest of the project was made possible only by Larry's remarkable fabrication skills. "There is a tremendous amount of custom fitting involved, so a project like this isn't for the faint of heart," he advises. Larry didn't keep a running tally, but he estimates that he's invested several hundred hours of labor over the course of a year to complete the car. Much of that time was spent mating the Corvair body to the G-body frame, and relocating the motor to the opposite end of the car. The reinforced sections of the unibody had to be cut out of the Corvair, which Larry says was quite a challenge. "After cutting and narrowing the rocker panels, I slipped the Corvair body over the side rails of the G-body frame. The front of the frame was cut near the steering box, and the back of the frame was cut right above the rear wheels. The frame was welded directly to the body at those points, which I thought would give me a harsh ride, but the car is so smooth it's unbelievable. The location of the cuts allows running a G-body suspension underneath a Corvair," Larry explains.

To put the scope of this undertaking into perspective, attaching the body to the frame was just the beginning. Since rear-engine Corvairs don't have trans tunnels, Larry modified the floorboard out of a G-body to fit. Furthermore, the firewall had to be moved rearward to make space for the big-block; a new floorboard was fabricated where the engine used to live, and a gas tank out of a '72 Skylark was relocated to the back of the car and tucked up underneath the newly created trunk. Surprisingly, in the midst of all the hacking performed in the name of functionality, he didn't forget about the pretty stuff. Bolt-on aesthetic embellishments are in short supply for Corvairs, but once again Larry's fab skills paid off. He bought a hoodscoop for a Chevelle, then cut, curved, and stitch-welded it at 1-inch increments to re-contour its profile to match the Corvair. The same treatment was applied to the spoiler, which is off a Camaro; a process that took 40 hours by itself.

Perhaps the biggest drawback of transforming a unibody chassis into a full-frame car is the weight penalty. The extra metal bumps curb weight up to 3,200 lbs, which is still relatively lightweight, but that mass isn't much of an issue with a 455 under the hood. It's based on a $100 salvage yard core that's been bored to 462 cubes. It retains the stock crank and rods, and Wiseco slugs provide a 10.2:1 ratio of squish. Topped with Bulldog Performance aluminum heads and a mild 231/239-at-.050 Lunati hydraulic flat-tappet cam, Larry estimates the output at 550 hp. It's all backed by a 200-4R trans and an 8.5-inch 10-bolt rearend, both out of a Buick Grand National. Although definitive dyno numbers would be nice, the only performance figures that really matter are the Corvair's 10-second e.t.'s.

While mechanical kinks are inevitable in a project of this caliber, the Corvair has only had one chronic ailment. As rear-engine cars, Corvairs had no need for a grille up front, which made cooling the Buick mill quite a chore. "I didn't want to cut a hole between the headlights for airflow because it would have ruined the look of the car," Larry explains. "I used the largest radiator that would fit between the frame rails, and angled the top of it forward to direct air through it from the bottom of the car. It overheated at first, so I cut the back of the bumper a bit to improve airflow, and that solved my cooling problems for good."

Obviously, Larry is one hell of a craftsman, and without question, the creator of one wicked street machine. His original goal was to build a car that looked like it came equipped with a front-mounted big-block Buick from the factory, and he's been wildly successful in his endeavors. In the process of addressing the Corvair's quirks-its vapid powerplant, oddball engine placement, marginal driveline strength, and love-it-or-leave-it styling-he's infused it with adaptations that could have prolonged the platform's existence had they been developed decades prior.