"Perhaps the best litmus test...
"Perhaps the best litmus test is to goose this potent big-block at the supermarket and count the car alarms and cryin' kids."
So we've had Pro Street, Pro-Touring, and lately a serious rethinking of the Pro Street ethic. We've always had street-and-strip cars, though. Stuff's been around since bacon and eggs. It appears to have a mind of its own and remains an extremely popular niche, only today, it's called Street Fighter. We like it because it brews the car down to its essence-no frills and few if any creature comforts. The motor and mechanical substance is the street-and-strip car's charter and its legacy. Though it's primarily a drag strip driver, it is able to absorb the vagaries of the street. You just gotta be ready for them, that's all.
Either it's a growing trend or it's adherence to the original tenets, take your pick, but the popular-rendition street fighter still eschews comfort and accentuates metal-to-metal and requires a gritty constiituon. You'll have a heater but you certainly won't have an AM radio or working windshield wipers? Maybe. Would "All Motor" be a better term for these cars? Perhaps the best litmus test is to goose this potent big-block at the supermarket and count the car alarms and cryin' kids. We bet there would be too many to count.
When we spoke with Jeff Robinson, owner of our feature car, and gushed into our fetish for the big GM B-bodies, he fell right into it. "I had two of 'em-a '65 and a '67 Impala. The '65 had the motor that's in my Camaro now. In the tub o' guts body, it ran 10.59 through the mufflers on ET Street tires. I owned that car for 13 years. I enjoyed it because it was different and it was unexpected." Maybe he just got fed up with the lack of interest the hard parts aftermarket seems to have for these classic sedans. These days, you can find stuff for any Camaro on a matchbook cover.
Jeff became the recipient of this Camaro the time-honored way. The Flatwoods, Ky. resident got a line on a '71 Z28 RS that a cousin of a friend had bought with totally respectable intentions. Sure enough, cuz wanted himself a house and decided to off the Camaro to help him get it. Jeff was right there with a wheelbarrow. He sold his beloved Impala and never looked back.
"The Camaro had lots of new sheet metal, but it had been poorly installed," Jeff told us. Eventually, he handed that part of the buildup to JAS Street Rods, but before it went to paint, Randy and Tim Boggs, and Mike Van Hoose helped Jeff piece the rest of it together. Since the motor was already built and tested, they concentrated on the chassis, suspension, and bed springs. No brain surgery here. After the car returned from Carl Wilson (for an 8-point rollcage) in Ashland, Ky., thence from Bodley Chassis (for frame connectors) in Cincinnati, the lads assembled the rear suspension around a Moser 12-bolt axle fitted with 4.10:1 gears and a limited-slip differential. They located it with Cal Tracs leaf springs, Cal Tracs bars, and Lakewood shock absorbers.
At the front, the job was a little easier. The OE control arms got new bushings, Moroso springs, and Carrera shocks. They put Wilwood Dynalite Pro Series discs all the way around and capped them with the wheels and tires of the day: Mickey Thompson ET Fronts measure 26x5 and ride on 15x4 Weld Alumastar forgings; the rear combination comprises ET Street 28x12.50 slicks on wide 15x10 Alumastars. Since Jeff won't ever be slinging this dude into a hard right-hander anytime soon, he deemed the front and rear anti-sway bars superfluous.
In 1997, BES Racing in West Harrison, Ind., well-known engine builders on the NMCA circuit and in the Jeg's Engine Masters Challenge, built the 540 with a 4.500x4.250-inch bore and stroke. They fit the Wiseco pistons to Eagle 3D connecting rods, which ride on a Shafiroff Race Engines crankshaft. A Moroso oil pan seals the bottom of the engine; a Crane double-roller timing chain links cam with crank. The cylinder heads are heavy breathers-Dart Pro 1 CNC-ported aluminum (335cc intake ports) that hold 2.30/1.88-inch valves. Rows of Harland Sharp rocker arms are jiggled by Manley pushrods goosed by COMP Cams roller lifters. COMP Cams also provided the guide plates, retainers, and locks.