Popular Hot Rodding Magazine Homepage Popular Hot Rodding

0108PHRBBFord09z

Our top end is dead serious, so our bottom end better be able to cope. Mark tells us the stock two-bolt main setup is fine once the bolts have been replaced by studs, and the oiling system has been worked over. There are some important points to address when building a hot 460, and most of them are oil-related. Mark begins by porting out the oil pump feed hole for increased volume.
Big-Block Shootout Part 3

Our top end is dead serious, so our bottom end better be able to cope. Mark tells us the stock two-bolt main setup is fine once the bolts have been replaced by studs, and the oiling system has been worked over. There are some important points to address when building a hot 460, and most of them are oil-related. Mark begins by porting out the oil pump feed hole for increased volume.  View Related Article

 

Get Adobe Flash player