|
Small-Block Chevy Engine - Danger Mouse Recap
There was a time not that long ago, when engine dynos were considered a black art. Not everyone believed what the dyno had to offer and... more |
|
|
|
Small-Block Chevy - Design For The Times
It seems gasoline prices are on a constant unstoppable climb. The rate of this climb changes, and in our current national situation these... more |
|
|
|
Small Block Engine Build - Cheap Swill!
It seems gasoline prices are on a constant unstoppable climb. The rate of this climb changes, and in our current national situation these... more |
|
|
|
447 HP Vortec Small-Block Build - Budget Sledgehammer
There are many different ways to build an engine, and when the object is a 350 Chevrolet, it would seem they've all been tried. We've seen... more |
|
|
|
350 Chevy Bolt-On Power Mods
Sure, we've been around the game long enough to know that bolting parts on a 350 Chevy small-block has been done before--but the difference... more |
|
|
|
LS7 Unplugged
lthough it's built on the same Gen III/Gen IV architecture as the current LS1 and LS2 engines, the 7.0-liter LS7 that comes as standard... more |
|
|
|
Mechanical Mastery
Every once in a while something really special comes out of the Big Three, something well beyond the standard production powerplants,... more |
|
|
|
LS2: An Inside Look
When it was introduced for the 1997 model year in the then-new fifth-generation Corvette, the Gen III small-block was indeed a revolution.... more |
|
|
|
Sonic Treasure
Seven hundred and ten fuel-injected, street-drivable normally-aspirated horsepower from a 441-inch small-block Chevy hardly sounds like a... more |
|
|
|
|
Sonic Testing - Sonic Treasure
Seven hundred and ten fuel-injected, street-drivable normally-aspirated horsepower from a 441-inch small-block Chevy hardly sounds like a... more |
|
|
|
Building A Budget G-Machine
In our quest to build a Budget g-Machine, the powerplant became a major consideration. Naturally, we have many options, so we evaluated all... more |
|
|
|
Bored Yet?
The LS1 has certainly come of age. Now in its sixth year of production, the aluminum V-8 is making quite a reputation for itself. It was... more |
|
|
|
Meticulous Mouse For The Mule
After building and running practically every engine known to the Bow Tie world, you might be wondering why I would build a... more |
|
|
|
Serious Strategy
"This Challenge is the cat's ass...I still can't believe you're doing it. But, I'm really glad you are. How about a beer?" more |
|
|
|
The Hunger
The Popular Hot Rodding Engine Masters Challenge is an open forum, meaning anyone who's got the guts to enter could. The doors closed on... more |
|
|
|
Traditional Evolution
Joe Sherman has been involved in racing since his teenage years, and if you're a math wiz, you'll soon figure that 61-year-old Joe has been... more |
|
|
|
Sharp Shooter
Ron Shaver was raised right. His grandfather was a fabricator, his father a machinist. When his interest toward high-performance automotive... more |
|
|
|